The water and sediment content of crude oil is significant because it can cause corrosion of equipment and problems in processing.Determination of water and sediment content is required to measure accurately net volumes of actual oil in sales, taxation, exchanges, and custody transfers.It is not anticipated that this test method, which is written with a dedicated laboratory facility in mind, is likely to be used in field test rooms or sample rooms due to safety concerns for proper ventilation and handling
Overview
HK-5Y oil test centrifuge describes the laboratory determination of water and sediment in crude oils by means of the centrifuge procedure, conforms to several ASTM standards, ASTM D1796,ASTM D4007,ASTM D91, ASTM D96… This centrifuge is used for determining water and sediment in crude oils is not entirely satisfactory. The amount of water detected is almost always lower than the actual water content. When a highly accurate value is required, the revised procedures for water by distillation.
Features
1. It uses brush-less frequency motor drive which in great torque.
2. Microprocessor control system & soft touch control panel.
3. LCD display which indicates run parameters.
4. Auto-electric lid interlock with alarm.
5. Heated chamber, ambient to 80°C.
6. High performance, low noise and less vibration.
7. Maximum speed is 4000r/min, the maximum RCF is 3830×g.
Main specification and technical parameters:
| The Max.speed |
4000 r/min |
| The Max.volume |
4×100 ml |
| The Max.RCF |
3830×g |
| Timer |
1~99min |
| Speed Accuracy |
±20 r/min |
| Noise |
≤60dB(A) |
| Power supply |
220V 60Hz 10A |
| Temperature Range |
Room temperature+10ºC~80ºC |
| Product dimension |
685mm×500mm×405mm |
Rotor Parameters
This equipment is ONLY ideal for separating the Oil to test the sediment and water content .
Rotor No.
|
Rotor Type |
Max.Speed (rpm) |
Max.RCF (g ) |
31493 |
Swing out rotor
|
4000rpm |
3830g |
Audited Supplier 
){kind=link}