HK-21929 Automatic Tag Closed Cup Flash Point Apparatus
|FOB Price:||US $12,000-12,050 / SET|
|Min. Order:||1 SET|
|Min. Order||FOB Price|
|1 SET||US $12,000-12,050/ SET|
|Production Capacity:||10 Sets Per Week|
|Payment Terms:||L/C, T/T, D/P|
- Model NO.: HK-21929
- Power: 1500W
- Test Temperature: -50--70 Degree Centigrade
- Printer: Thermal Printer
- Ambient Requirements: Temperature 10--40 Degree Centigrade
- Transport Package: Carton + Pallet
- Origin: China
- Rated Voltage: AC220V ±10% 50Hz
- Operation Way: Touched LCD
- Ignition Gas Source: Pipelined Gas or LPG
- Cooling Mode: Double Compressor Refrigeration
- Trademark: HK
- Specification: 70*80*60cm
Flash point is used in shipping and safety regulations to define flammable and combustible materials. One should consult the particular regulation involved for precise definitions of these classes.
Flash point can indicate the possible presence of highly volatile and flammable materials in a relatively nonvolatile or nonflammable material. For example, an abnormally low flash point on a sample of kerosene can indicate gasoline contamination.
This HK-21929 automatic Tag closed cup flash point apparatus conforms to the ASTM D56 standard Test Method for Flash Point by Tag Closed Cup Tester , is used For flash point determinations of liquids with a viscosity of below 5.5 centistokes (cSt) at 104°F (40°C) or below 9.5cSt at 77°F (25°C), and a flash point below 200°F (93°C) except cut-back asphalts, those liquids which tend to form a surface film under test conditions and materials which contain suspended solids. We use gas supply for the apparatus, gas circuit adopts stainless steel pipe, anti-aging, constant using. The instrument is highly automated with simple operation and accurate result. The instrument is equipped with two Danfoss compressors as cooling system, test lowest flash point temperature can reach minus 50 degree.
- Fast refrigerating speed, big depth, could do -40ºC oil sample test.
- From room temperature to -60ºC just needs 30min.
- Realize slope temperature rising, 3ºC/min, 1ºC/min.
- Equips with liquid level overflow port and liquid adding port.
- Glass PT100, temperature sensing rate is same as thermometer.
- Touch screen operation, thermal printer, store thousands of data.
- Equips unknown flash point detection
- Ion ring detects flash point automatically, on/off scribing ignition automatically.
- Rated voltage:AC220V ±10% 50HZ
- Operation way:Touched LCD
- Test temperature:-50~70ºC
- Ignition gas source:pipelined gas or LPG ,which pressure is less than 10Kpa
- Printer:Thermal printer
- Cooling mode: double compressor refrigeration
- Ambient requirements:temperature 10~40ºC;humidity≤85%